家具產品室內家具，戶外家具，辦公家具驗貨的通用標準

furniture-club

1.       Scope范圍

This document specifies the general qualityrequirements for the category of Furniture including domestic furniture,outdoor furniture and office furniture, etc. It is used as a general guidelinefor inspection if clients have not defined their requirement.

此文件為針對家具產品(包括室內家具,戶外家具,辦公家具等)驗貨的通用標準。如果客戶沒有特別的要求，在此定為通用的驗貨指南。

2.       InspectionCriteria of Product / Package產品/包裝的驗貨標準

?  Reference standard: 引用標準

-   EN1725, EN747-1/2, EN716-1/2, EN1130-1/2, EN1728,EN1022, EN12520, EN12521, EN1335-1/2/3, EN1730,EN527-1/2/3, EN581-1/2/3, BS4875-1/5/7, ISO7170,BS14749

-   ASTM F 1427, BIFMA X5.1, BIFMA X5.5, ASTM F 1858,ASNI A 161.1

?  Product: 產品

2 Must be without any unsafe defect for using;

   不允許有在實際使用中任何對使用者造成傷害的缺陷；

2 Should be free of damaged, broken, scratch, crackle etc.Cosmetic / Aesthetics defect;

不應有任何損壞，破碎，擦傷，或碎裂等外觀缺陷；

2  Must be conform to the shippingmarket legal regulation / client’s requirement;

必須符合銷往國當地的法規以及客戶的要求；

2  The construction, appearance,cosmetics and material of all units should comply with client’s requirement /approved samples;

    產品的結構，外觀，材料等必須符合客戶的要求或與樣品保持一致；

2 All units should have full function complying withclient’s requirement / approved samples;

產品功能必須符合客戶的要求或與樣品保持一致；

2 The marking / label on unit should be legal and clear.

    產品上的標記/標簽必須符合法規要求且清晰明確。

Package:包裝

2  Allunits will be adequately packaged, and constructed from suitably robustmaterials, such that it arrives in store in a merchantable condition;

     產品要有足夠強度的材料構成的充分包裝，使得貨物以可銷售的狀態到達目的倉庫；

2  Thepackaging material can protect the goods from damage during transportation;

    在運輸過程中，包裝材料能防止貨物受損；

2  Theshipping mark, bar code, label (such as price label), should conform toclient’s spec. and/or approved samples;

     箱麥，條形碼，標簽（例如：價格標簽）應符合客戶的要求或與樣品保持一致；

2  Thepackage should comply to client’s requirement / approved samples;

    包裝必須符合客戶的要求或與樣品保持一致；

2  Textof illustration, instruction, label and warning statement etc. must be clearlyprinted in user’s language;

圖解，說明書，標簽，警告聲明等應清晰地印有使用者語言；

2  Theillustration and instruction on the packaging must conform to the product and itsactual performance.

包裝上的圖解和說明書必須與實際產品及其功能保持一致；

2  Themethod and material of pallet/crate etc. should be approved by client.

        棧板/板條箱包裝的材料及方式必須經客戶批準

3.  Inspection Plan & Defects classification檢驗計劃及缺陷分類

   

? Samplingprocedure & Defects Definition, please refer to SHOP-HI001 GeneralInspection Operation Procedure

抽樣程序以及缺陷定義，詳見SHOP-HI001 通用檢查程序 – 最終隨機檢查。

2 Critical 0 Non-conformityis not allowed

2 AQL 1.5 For Major Non-Conformity

2 AQL4.0 For MinorNon-Conformity

全部內容請下載：

木奇

不錯的家具檢驗標準資料，頂！